- 您现在的位置：买卖IC网 > Sheet目录1193 > ACS9593EVB (Semtech)EVALUATION BOARD FOR ACS9593
ToPSync?
ACS9593T
ADVANCED COMMS & SENSING
Principles of operation
The ACS9593T provides standards-based timing for
equipment used in packet switched networks. Control of the
device is exercised by an API. The ACS9593T also has a Self-
Test capability that checks for defective operation prior to use.
The ACS9593T provides timing solutions that deliver a
performance better than that required by the G.8261 2
standard. The device can align its timebase with that of the
PTP Grandmaster and can generate time-of-day signals as well
as clock signals. The device filters packet delay variations and
maintains phase/time alignment with the Grandmaster,
without the need for PTP assistance in intermediary network
nodes (such as boundary clocks or transparent clocks).
Possible applications include:
? Providing a programmable rate clock (up to 62.5 MHz),
allowing wireless operators to migrate to packet-based
backhaul technology and eliminate T1/E1 interfaces, while
maintaining the required timing to all network elements.
? Providing a 1 PPS signal, with or without associated ToD
information, which is aligned with the timebase of a central
Grandmaster clock, thereby supporting applications which
require a common phase to be available around a network
(such as wireless applications using TDD technologies).
The ACS9593T operates as a slave in accordance with the PTP
best master clock algorithm (BMCA), or via configuration that
allows the device to operate with another clock selection
mechanism.
The ACS9593T has holdover and free-run features for
conditions when no timing packet streams are available. The
stability of the output clocks during such self-timing activities
is dependent on the performance of an external oscillator that
controls the internal clocks. The oscillator should be chosen to
suit the frequency accuracy and phase stability requirements
of the application.
The ACS9593T performs all the functions required for a
complete, stand-alone, clock recovery system - including
hardware time-stamping, PTP protocol, network noise
suppression, network re-route accommodation and holdover,
and provides outputs for applications that require continuation
of frequency, phase and time. A serial peripheral interface is
provided for communication with a host microprocessor.
An API is provided for configuration and status monitoring. The
API offers system developers the means to produce
appropriate application software to configure and control the
ACS9593T and thus integrate the required functionality from
the device into their synchronization scheme.
The ACS9593T requires:
1 MB of SRAM;
4 Mbits of Flash memory;
a generic packet PHY with appropriate termination circuitry.
FINAL PRODUCT BRIEF
References to standards
[1] IEEE Std. 1588? -2002 (2002).
[2] ITU-T G.8261 (former G.pactiming).
[3] RoHS Directive 2002/95/EC.
[4] Waste electrical and electronic equipment (WEEE) 2003.
Associated documents
Refer also to the ACS9593T Datasheet, User Guide and
Application Programming Interface document.
Disclaimers & acknowledgements
This product is not designed or intended for use in life support
equipment, devices or systems, or other critical applications,
and is not authorized or warranted for such use.
Semtech Corporation reserves the right to make changes to
this product without notice. Customers are advised to obtain
the latest version of the documentation before placing orders.
Operation of this device is subject to the User’s
implementation and design practices. It is the responsibility of
the User to ensure that equipment employing this device is
compliant to all relevant standards.
ToPSync? is a registered trademark of the Semtech
Corporation. All other manufacturers’ trademarks are hereby
acknowledged.
ACS9593TPB_US, Revision 05, January 2010
?2010 Semtech Corp.
Page 2
www.semtech.com
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
AD-CCES-CORP-UNL
CORP LICENSE FOR CCES UNLIMITED
AD-UCFS-SPRD
PRD LIC UCFS CORE CCES 1 PROD
AD-UCOS3-SPRD
PRD LIC UCOS3 RTOS CORE CCES SGL
AD-UCUSBD-SPRD
PRD LIC UCUSB DEV CORE CCES SGL
AD637-EVALZ
BOARD EVALUATION FOR AD637
AD736-EVALZ
BOARD EVALUATION FOR AD736
AD737-EVALZ
BOARD EVALUATION FOR AD737
AD8007AKS-EBZ
BOARD EVAL FOR AD8007AKS
相关代理商/技术参数
ACS9593T
制造商:Semtech Corporation 功能描述:
ACSA
制造商:Apex Tool Group 功能描述:TWEEZERS, ANTI-MAGNETIC, HARDENED TIPS, SWISS MADE 制造商:EREM 功能描述:PRECISION TWEEZER, 4.25IN; Tweezer Type:Straight; Overall Length:4.25"; Tweezer Body Material:Stainless Steel; Tweezer Tip Material:Stainless Steel; Overall Length:108mm ;RoHS Compliant: NA
ACSA02-41CGKWA-F01
功能描述:LED 显示器和配件 Single Green 570nm Common Anode RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube
ACSA02-41EWA-F01
功能描述:LED 显示器和配件 HI EFF RED DIFFUSED 1 DIGIT RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube
ACSA02-41PBWA
制造商:KINGBRIGHT 制造商全称:Kingbright Corporation 功能描述:ACSA02-41PBWA/A-F01
ACSA02-41PBWA/A-F01
功能描述:LED 显示器和配件 BLUE DIFFUSED 1 DIGIT RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube
ACSA02-41SEKWA-F01
功能描述:LED 显示器和配件 Single Red 601nm Common Anode RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube
ACSA02-41SGWA-F01
功能描述:LED 显示器和配件 GREEN DIFFUSED 1 DIGIT RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube